Sterilization in OT – OT Technician MCQ Questions and Study Notes

Sterilization in the OT ensures instruments and supplies are safe for surgery. Practice free OT Technician MCQ questions on this topic below.

Take the Sterilization in OT practice test All 20 chapters

Learning objectives

Study notes

Instruments are cleaned, packed and sterilized by steam, low-temperature or other validated methods. Sterile packs are checked for integrity, indicator change and expiry or event-related status before opening.

Flash sterilization is for urgent situations only, not for convenience.

Important points

Key terms

Autoclave Indicator Flash sterilization Pack integrity

Practice MCQs on Sterilization in OT

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. Before opening a sterile pack, check:

  1. Color
  2. Weight only
  3. Smell
  4. Integrity and indicator
Show answer
Answer: D. Integrity and indicator
Safety check.

Report an error in this question

2. A torn or wet pack is:

  1. Wrapped
  2. Used
  3. Dried
  4. Not used
Show answer
Answer: D. Not used
Compromised.

Report an error in this question

3. Flash sterilization should be:

  1. Limited to urgent needs
  2. Routine
  3. Unlimited
  4. Preferred
Show answer
Answer: A. Limited to urgent needs
Not for convenience.

Report an error in this question

4. Steam sterilization uses:

  1. Cold
  2. Light
  3. Heat and moisture
  4. Sound
Show answer
Answer: C. Heat and moisture
Autoclave.

Report an error in this question

5. Sterile items are opened using:

  1. Speed only
  2. Any method
  3. Aseptic technique
  4. Bare hands
Show answer
Answer: C. Aseptic technique
Prevent contamination.

Report an error in this question

6. A chemical indicator shows:

  1. Absolute sterility
  2. Age
  3. Cost
  4. Exposure to process
Show answer
Answer: D. Exposure to process
Not proof of sterility.

Report an error in this question

7. An autoclave indicator tape color change shows:

  1. That the pack was exposed to steam
  2. The weight
  3. The pack age
  4. That the pack is sterile
Show answer
Answer: A. That the pack was exposed to steam
Exposure only.

Report an error in this question

8. Sterility of a wrapped pack is lost by:

  1. Color
  2. Time only
  3. Events such as tears or moisture
  4. Weight
Show answer
Answer: C. Events such as tears or moisture
Event-related sterility.

Report an error in this question

9. Sterile packs should be stored:

  1. On the floor
  2. In a clean, dry, closed area
  3. Near sinks
  4. Wet
Show answer
Answer: B. In a clean, dry, closed area
Protect the barrier.

Report an error in this question

10. An expired or wet pack should be:

  1. Not used and returned for reprocessing
  2. Used first
  3. Dried and used
  4. Hidden
Show answer
Answer: A. Not used and returned for reprocessing
Not sterile.

Report an error in this question

Questions 11 to 20

11. Ethylene oxide is used for:

  1. Heat- and moisture-sensitive items
  2. Linen
  3. Floors
  4. Heat-stable items only
Show answer
Answer: A. Heat- and moisture-sensitive items
Low-temperature sterilization.

Report an error in this question

12. Internal chemical indicators are placed:

  1. Only outside
  2. Inside the pack
  3. In storage
  4. On the floor
Show answer
Answer: B. Inside the pack
Check before use.

Report an error in this question

13. Biological indicators confirm:

  1. Pack weight
  2. Pack color
  3. The sterilizer can kill spores
  4. Cleanliness
Show answer
Answer: C. The sterilizer can kill spores
Strongest test.

Report an error in this question

14. A peel pouch is opened by:

  1. Peeling the edges apart without touching the contents
  2. Cutting through the item
  3. Using wet hands
  4. Tearing the item
Show answer
Answer: A. Peeling the edges apart without touching the contents
Aseptic presentation.

Report an error in this question

15. A sterile item dropped below table level is:

  1. Better sterile
  2. Wet
  3. Considered contaminated
  4. Still sterile
Show answer
Answer: C. Considered contaminated
Replace it.

Report an error in this question

16. A sterile drape touching a non-sterile surface is:

  1. Contaminated
  2. Still sterile
  3. Dry
  4. Heavier
Show answer
Answer: A. Contaminated
Replace it.

Report an error in this question

17. After opening a tray you should:

  1. Ignore it
  2. Close it
  3. Count and check the instruments
  4. Leave it
Show answer
Answer: C. Count and check the instruments
Confirm content.

Report an error in this question

18. Reprocessing of used instruments begins with:

  1. Storage
  2. Point-of-use care and transport to CSSD
  3. Packing
  4. Sterilizing
Show answer
Answer: B. Point-of-use care and transport to CSSD
Keep soil moist.

Report an error in this question

19. Sterility must be checked before use by:

  1. Nobody
  2. The patient
  3. The person opening or using the item
  4. A visitor
Show answer
Answer: C. The person opening or using the item
Check integrity and indicator.

Report an error in this question

20. A rigid sterilization container should be checked for:

  1. Its color
  2. Intact filters and seals
  3. Its brand
  4. Its weight only
Show answer
Answer: B. Intact filters and seals
Container integrity protects sterility.

Report an error in this question

Related chapters

Continue learning

OT Technician interview questions Mock tests MCQ practice

Frequently asked questions

How many Sterilization in OT MCQs are available?

This page has 20 free MCQs on Sterilization in OT with answers and explanations. More are added over time.

Is Sterilization in OT practice free?

Yes. You can practice without login or payment.

Are these official OT Technician exam questions?

No. They are original practice questions written for learning.