CSSD Interview Questions and Answers
55 common CSSD interview questions with short model answers. Revise them, then test yourself with free CSSD MCQ practice.
CSSD chapters and MCQs Practice test
Interview questions and model answers
1. What is the difference between cleaning, disinfection and sterilization?
Cleaning removes soil, disinfection reduces most microbes, and sterilization destroys all microbial life including spores.
2. Why must instruments be cleaned before sterilization?
Soil shields microbes and blocks the sterilant.
3. What does a Bowie-Dick test check?
Air removal and steam penetration in a pre-vacuum steam sterilizer.
4. What do you do with a wet pack?
Treat it as not sterile, reprocess it and look for the cause.
5. What is the IFU and why does it matter?
The manufacturer's validated instructions; cleaning and sterilization must follow them.
6. Explain the workflow in a CSSD.
Items are received, decontaminated, inspected and assembled, packaged, sterilized, stored and distributed. Flow is one-way from dirty to clean.
7. Which PPE do you wear in decontamination?
A fluid-resistant gown, gloves, face protection and a head cover.
8. How do you clean a lumened instrument?
Flush and brush with correctly sized brushes per the IFU, then inspect the lumen.
9. What is the difference between a chemical and a biological indicator?
A chemical indicator shows exposure to process conditions; a biological indicator uses resistant spores to confirm sterilizer lethality.
10. How often are steam sterilizers tested with biological indicators?
At least weekly and with every load containing implants, following facility policy.
11. What is event-related sterility?
Sterility is lost by events such as tears, moisture or damage, not simply by the passage of time.
12. What do you do if a biological indicator is positive?
Quarantine or recall the load, remove the sterilizer from service and investigate per protocol.
13. Why should a sterilizer not be overloaded?
Overloading blocks steam circulation and causes wet packs and failed sterilization.
14. What is the Spaulding classification?
It groups items as critical, semi-critical or non-critical by infection risk to decide the processing level.
15. How do you ensure traceability in a CSSD?
Keep load records, unique set identifiers and tracking records so items can be recalled quickly.
16. What is bioburden?
The number of viable microorganisms on an item before sterilization.
17. What is decontamination?
Removing soil and reducing microbes so items are safe to handle.
18. Why does the decontamination area use negative pressure?
It keeps contaminated air from flowing into clean areas.
19. What is an enzymatic cleaner?
A detergent with enzymes that break down protein, fat and starch soil.
20. Why should saline not be used on instruments?
It can cause pitting and corrosion.
21. What is ultrasonic cleaning?
Cleaning by cavitation bubbles that loosen soil from crevices.
22. Why is an ultrasonic bath degassed?
Dissolved air reduces cavitation efficiency.
23. What is a washer-disinfector?
A machine that washes, rinses, thermally disinfects and dries instruments.
24. How do you inspect instruments?
Under good light and magnification for soil, damage, corrosion and function.
25. What is a ratchet test?
Checking that hemostat ratchets hold securely.
26. Which lubricant is used on instruments?
A water-soluble, steam-permeable instrument lubricant per the IFU.
27. What is a sterile barrier system?
Packaging that allows sterilant entry and maintains sterility until use.
28. What goes inside every package?
An internal chemical indicator.
29. What weight limit applies to instrument sets?
Commonly 25 pounds (11.4 kg).
30. Why should wraps not be too tight?
Tight wraps block sterilant penetration.
31. What is a peel pouch used for?
Packaging small, light items.
32. What is a rigid container?
A reusable sterilization container with filters or valves, used per the IFU.
33. What temperature does pre-vacuum steam sterilization use?
Typically 132–135 °C (270–275 °F).
34. What is gravity displacement sterilization?
Steam displaces air downward, typically at 121 °C for a longer time.
35. What does a Bowie-Dick failure mean?
An air removal problem; take the sterilizer out of service until fixed.
36. What is immediate-use steam sterilization?
Rapid sterilization for urgent use only, not routine and not for implants.
37. Why is ETO aeration required?
To remove toxic residues from items.
38. Which materials must be avoided in hydrogen peroxide plasma?
Cellulose such as paper and linen.
39. Which organism is the biological indicator for steam?
Geobacillus stearothermophilus.
40. Which organism is the biological indicator for ETO?
Bacillus atrophaeus.
41. What is a control biological indicator?
An unprocessed indicator incubated to confirm spore viability.
42. Does a chemical indicator prove sterility?
No, it shows exposure to conditions only.
43. What is an integrating indicator?
A chemical indicator reacting to several parameters, closer to BI performance.
44. How do you store sterile items?
In a clean, dry, controlled area, off the floor and handled gently.
45. What do you do with a dropped sterile pack?
Inspect it and treat it as not sterile if integrity is compromised.
46. What is stock rotation?
First in, first out.
47. What is a recall?
Removing potentially unsafe items from use after a process failure.
48. What triggers a recall?
A failed BI, sterilizer malfunction or wet packs found in use.
49. What is instrument tracking?
Recording the processing and use history of sets, often with barcodes.
50. What is CAPA?
Corrective and preventive action for problems found.
51. What are standard precautions?
Treating all blood and body fluids as potentially infectious.
52. What is the first aid for a needle-stick injury?
Wash with soap and water, report it and follow protocol.
53. Why is hand hygiene important in CSSD?
It prevents cross-contamination.
54. What are KPIs in a CSSD?
Measures such as wet pack rate and sterilization failures.
55. How do you handle a loaner instrument set?
Receive it early, decontaminate and follow the vendor IFU with enough time to reprocess.
Keep preparing
A PDF with 200 important questions and answers for CSSD technicians preparing for interviews.
Get the book on Gumroad