Hardness – CSSD MCQ Questions and Study Notes

Hardness is caused by calcium and magnesium and leads to scale and spotting. Practice free CSSD MCQ questions on this topic below.

Take the Hardness practice test All 45 chapters

Learning objectives

Study notes

Hard water contains calcium and magnesium. It leaves scale in washers and sterilizers and spots on instruments, and it reduces detergent action. Softeners swap hardness minerals for sodium but do not make water mineral-free.

Important points

Key terms

Hardness Scale Ion exchange

Practice MCQs on Hardness

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. Water hardness is mainly caused by:

  1. Chlorine
  2. Nitrogen
  3. Calcium and magnesium
  4. Oxygen
Show answer
Answer: C. Calcium and magnesium
Minerals from the ground.

Report an error in this question

2. Hard water can cause:

  1. Faster rinsing
  2. Smoother steel
  3. Scale and spots
  4. Nothing
Show answer
Answer: C. Scale and spots
Minerals deposit when water dries.

Report an error in this question

3. A water softener removes:

  1. Chloride
  2. All bacteria
  3. Silica
  4. Calcium and magnesium by ion exchange
Show answer
Answer: D. Calcium and magnesium by ion exchange
It swaps ions for sodium.

Report an error in this question

4. Scale in a washer or sterilizer can:

  1. Block spray arms and reduce efficiency
  2. Improve heating
  3. Cool the water
  4. Do nothing
Show answer
Answer: A. Block spray arms and reduce efficiency
Scale harms equipment.

Report an error in this question

5. Hardness is commonly reported as:

  1. mg/L as calcium carbonate
  2. psi
  3. Degrees Celsius
  4. kg
Show answer
Answer: A. mg/L as calcium carbonate
A standard unit.

Report an error in this question

6. Does a softener make water mineral-free?

  1. Yes, fully
  2. No, it only swaps hardness minerals for sodium
  3. Yes, and removes chloride
  4. Yes, and sterile
Show answer
Answer: B. No, it only swaps hardness minerals for sodium
Softened water still has dissolved ions.

Report an error in this question

7. Hardness may also be reported in:

  1. Grains per gallon
  2. psi
  3. Meters
  4. Degrees Celsius
Show answer
Answer: A. Grains per gallon
gpg is a common unit.

Report an error in this question

8. Temporary hardness is caused by:

  1. Bicarbonates, partly removed by boiling
  2. Oil
  3. Chlorine
  4. Silica
Show answer
Answer: A. Bicarbonates, partly removed by boiling
Boiling precipitates it.

Report an error in this question

9. Hardness can be tested with:

  1. Test strips or titration kits
  2. A clock
  3. A scale
  4. A ruler
Show answer
Answer: A. Test strips or titration kits
Simple field tests exist.

Report an error in this question

10. Softeners are regenerated using:

  1. Salt brine
  2. Oil
  3. Alcohol
  4. Steam
Show answer
Answer: A. Salt brine
Salt restores the resin.

Report an error in this question

Questions 11 to 20

11. If a softener runs out of salt:

  1. Nothing changes
  2. Hard water passes through
  3. Water becomes sterile
  4. Water becomes pure
Show answer
Answer: B. Hard water passes through
Check salt levels.

Report an error in this question

12. Soft water on its own helps by:

  1. Protecting equipment from scale
  2. Removing silica
  3. Making water sterile
  4. Removing chloride
Show answer
Answer: A. Protecting equipment from scale
But it is still not purified.

Report an error in this question

13. Scale on heating elements causes:

  1. Better heating
  2. Quieter machines
  3. Cooler water
  4. Reduced efficiency and overheating
Show answer
Answer: D. Reduced efficiency and overheating
Scale insulates the element.

Report an error in this question

14. Hard water affects detergent by:

  1. Reducing its effectiveness and foaming
  2. Making it blue
  3. Making it cheaper
  4. Making it stronger
Show answer
Answer: A. Reducing its effectiveness and foaming
Minerals bind detergent.

Report an error in this question

15. Equipment most sensitive to hardness includes:

  1. Floor mats
  2. Tray labels
  3. Washers, boilers and steam generators
  4. Paper wraps
Show answer
Answer: C. Washers, boilers and steam generators
Heating surfaces scale.

Report an error in this question

16. Softeners should be serviced by:

  1. Patients
  2. Trained maintenance staff
  3. Visitors
  4. Anyone
Show answer
Answer: B. Trained maintenance staff
Correct servicing keeps them working.

Report an error in this question

17. Softened water hardness should be tested:

  1. Once in ten years
  2. Never
  3. Only by guess
  4. At routine intervals set by policy
Show answer
Answer: D. At routine intervals set by policy
Check the softener works.

Report an error in this question

18. Spots after rinsing suggest checking:

  1. The tray weight
  2. The label
  3. Rinse water hardness and TDS
  4. The pack color
Show answer
Answer: C. Rinse water hardness and TDS
Find the source.

Report an error in this question

19. Descaling means:

  1. Polishing metal surfaces with a fine abrasive
  2. Removing scale with an approved descaler per IFU
  3. Sterilizing equipment with high heat
  4. Soaking items in saline to loosen soil
Show answer
Answer: B. Removing scale with an approved descaler per IFU
Use only approved products.

Report an error in this question

20. Minerals in hard water can deposit in:

  1. Nothing
  2. Paper
  3. Ultrasonic cleaners
  4. Labels
Show answer
Answer: C. Ultrasonic cleaners
Use treated water.

Report an error in this question

Related chapters

Continue learning

CSSD interview questions Mock tests MCQ practice CSSD NABH checklist

Frequently asked questions

How many Hardness MCQs are available?

This page has 20 free MCQs on Hardness with answers and explanations. More are added over time.

Is Hardness practice free?

Yes. You can practice without login or payment.

Are these official CSSD exam questions?

No. They are original practice questions written for learning.