Recall Procedures – CSSD MCQ Questions and Study Notes
A recall removes potentially unsafe items from use when a sterilization or process failure is found. Practice free CSSD MCQ questions on this topic below.
Take the Recall Procedures practice test All 45 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them in safe practice
Study notes
A recall is triggered by failed biological indicators, sterilizer malfunction, wet packs found in use or breaches in process. The affected load is identified through records and tracking.
Steps: stop use, quarantine and retrieve items, notify infection prevention and surgeons, assess patient exposure, investigate and document, then reprocess or discard. Corrective action prevents recurrence.
Important points
- Act quickly
- Use load records to identify items
- Notify infection prevention
- Document and prevent recurrence
Key terms
Recall Quarantine Load number Patient notification
Practice MCQs on Recall Procedures
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. A recall removes:
- Staff
- Beds
- Clean items
- Potentially unsafe items from use
Show answer
Protect patients.
2. A recall may be triggered by:
- Good BI
- Failed BI
- Clean printout
- Passed test
Show answer
Failure signal.
3. The first step is to:
- Wait a week
- Hide
- Continue
- Stop use and quarantine
Show answer
Contain risk.
4. Affected items are found using:
- Luck
- Rumor
- Load records and tracking
- Guessing
Show answer
Traceability.
5. Who should be notified?
- Vendors only
- No one
- Visitors
- Infection prevention and clinical team
Show answer
Coordinate response.
6. After a recall, items are:
- Reprocessed or discarded
- Used as is
- Stored
- Ignored
Show answer
Not used until safe.
7. Recall records should be:
- Erased
- Documented
- Hidden
- Guessed
Show answer
Evidence.
8. Investigation determines:
- Cost only
- Uniform
- Menu
- Cause of failure
Show answer
Root cause.
9. Preventing recurrence uses:
- Delay
- Silence
- Repeat failure
- Corrective action
Show answer
CAPA.
10. Patient exposure is:
- Ignored
- Hidden
- Assessed by the clinical team
- Guessed
Show answer
Risk evaluation.
Questions 11 to 20
11. A mock recall is used to:
- Train porters only
- Waste time
- Test the speed and accuracy of the recall system
- Order supplies
Show answer
Practice finds weak spots.
12. A recall needs a list of:
- Paint colors
- Staff birthdays
- Affected load numbers and item locations
- Menu choices
Show answer
You must find every item.
13. Items from a recalled load may be in:
- Only storage
- Storage, the OR, wards or already used
- Only the OR
- Nowhere
Show answer
Check everywhere.
14. Quarantine is used to:
- Stop use while checks are done
- Speed up work
- Sell items
- Hide items
Show answer
Contain risk.
15. Recalled items should be:
- Labeled 'Do not use' and separated
- Hidden
- Used first
- Mixed with stock
Show answer
Clear labeling prevents use.
16. A recall investigation is led by:
- Quality or infection prevention with the SPD supervisor
- The most recent new technician
- The vendor representative alone
- The patient's family
Show answer
Teamwork finds the cause.
17. After a recall the team reviews:
- What failed and how to prevent it
- Wrap colors
- Only staff names
- Lunch times
Show answer
Learning prevents repeats.
18. A positive BI can trigger recall of:
- Only linen
- Nothing
- Loads since the last acceptable result per policy
- Only the last pack
Show answer
Policy defines the scope.
19. A lookback means reviewing:
- Only the single load that failed
- The staff shift roster for the month
- The color of the indicator on the latest load
- Loads processed since the last good result
Show answer
Finds affected loads.
20. A recall is closed when:
- One item is found
- Nobody asks
- A week passes
- All items are accounted for and actions documented
Show answer
Close only after full follow-up.
Related chapters
- Previous: Quality Assurance & Audits
- Next: Sterile Processing Workflow
- Chapter 17: Infection Prevention & Safety
- Chapter 18: Quality Assurance & Audits
- Chapter 20: Sterile Processing Workflow
- Chapter 21: Regulations & Standards (US)
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Recall Procedures MCQs are available?
This page has 20 free MCQs on Recall Procedures with answers and explanations. More are added over time.
Is Recall Procedures practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.