Water Testing – CSSD MCQ Questions and Study Notes

Testing shows whether water meets its limits before it harms devices or patients. Practice free CSSD MCQ questions on this topic below.

Take the Water Testing practice test All 45 chapters

Learning objectives

Study notes

Water is tested for chemical purity (conductivity, hardness, chloride, silica) and microbial quality. Samples are taken aseptically at the correct point. The testing schedule follows policy, standards and the manufacturer, with extra tests after maintenance or changes.

Important points

Key terms

Sampling point Aseptic sampling Limit

Practice MCQs on Water Testing

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. Water testing is done to:

  1. Confirm water meets its limits
  2. Add color
  3. Heat water
  4. Save time
Show answer
Answer: A. Confirm water meets its limits
Verification protects patients.

Report an error in this question

2. A common pair of water tests is:

  1. Taste and smell
  2. Height and width
  3. Conductivity and microbial count
  4. Weight and color
Show answer
Answer: C. Conductivity and microbial count
One chemical, one microbial.

Report an error in this question

3. Extra testing is needed after:

  1. A label change
  2. A coffee break
  3. Maintenance, filter or membrane changes
  4. A holiday
Show answer
Answer: C. Maintenance, filter or membrane changes
Changes can affect quality.

Report an error in this question

4. Water samples should be collected:

  1. With dirty hands
  2. From any tap
  3. From a bucket
  4. Aseptically at the correct point of use
Show answer
Answer: D. Aseptically at the correct point of use
Poor sampling gives false results.

Report an error in this question

5. Testing frequency is set by:

  1. Policy, standards and the manufacturer
  2. The weather
  3. One person's mood
  4. Chance
Show answer
Answer: A. Policy, standards and the manufacturer
Follow the documented plan.

Report an error in this question

6. A result outside limits means:

  1. Delete it
  2. Ignore it
  3. Take corrective action and retest
  4. Wait a year
Show answer
Answer: C. Take corrective action and retest
Act on every failure.

Report an error in this question

7. Baseline testing is done:

  1. By chance
  2. Never
  3. When the system is installed or changed
  4. Only yearly
Show answer
Answer: C. When the system is installed or changed
Sets the starting picture.

Report an error in this question

8. A water test plan lists:

  1. What, where, how often and the limits
  2. Only names
  3. Only prices
  4. Only dates
Show answer
Answer: A. What, where, how often and the limits
A clear plan prevents gaps.

Report an error in this question

9. Sampling ports should be:

  1. Closed forever
  2. Dirty
  3. Wet with oil
  4. Clean and disinfected before sampling
Show answer
Answer: D. Clean and disinfected before sampling
Avoid contaminating samples.

Report an error in this question

10. Before collecting a sample you should:

  1. Follow the written sampling instructions
  2. Guess the method
  3. Use any bottle
  4. Skip labels
Show answer
Answer: A. Follow the written sampling instructions
Same method every time.

Report an error in this question

Questions 11 to 20

11. Samples must be labeled with:

  1. Only the color
  2. Nothing
  3. Only a number
  4. Location, date, time and collector
Show answer
Answer: D. Location, date, time and collector
Needed for traceability.

Report an error in this question

12. Some tests are sent to accredited labs because:

  1. They change water
  2. They are faster always
  3. Results are reliable and recognized
  4. They are free
Show answer
Answer: C. Results are reliable and recognized
Quality assurance.

Report an error in this question

13. Field test strips are:

  1. Quick screening tools with limited accuracy
  2. Calibration standards
  3. Sterile filters
  4. Exact lab methods
Show answer
Answer: A. Quick screening tools with limited accuracy
Confirm failures with lab tests.

Report an error in this question

14. An out-of-limit sample may be retested to:

  1. Confirm the result while acting per policy
  2. Add detergent
  3. Waste time
  4. Hide the first result
Show answer
Answer: A. Confirm the result while acting per policy
Do not delay safety actions.

Report an error in this question

15. Trend analysis of test results finds:

  1. Gradual drift
  2. Staff mistakes only
  3. Lunch times
  4. Paint colors
Show answer
Answer: A. Gradual drift
Early warning.

Report an error in this question

16. After a system repair water is tested:

  1. Before returning to critical use
  2. Never
  3. After a year
  4. After lunch
Show answer
Answer: A. Before returning to critical use
Prove it meets limits.

Report an error in this question

17. Testing should cover:

  1. Only the tap color
  2. Nothing
  3. Only the source
  4. Source, treated and point-of-use water
Show answer
Answer: D. Source, treated and point-of-use water
Each point can differ.

Report an error in this question

18. Test equipment must be:

  1. Old and unchecked
  2. Calibrated and in date
  3. Wet
  4. Painted
Show answer
Answer: B. Calibrated and in date
Accurate tools give accurate results.

Report an error in this question

19. Reagents and test strips have:

  1. No storage rules
  2. Unlimited life
  3. No labels
  4. Expiry dates that must be respected
Show answer
Answer: D. Expiry dates that must be respected
Expired items are unreliable.

Report an error in this question

20. Test results should be reported to:

  1. Nobody
  2. Only the vendor
  3. A visitor
  4. The responsible supervisor promptly
Show answer
Answer: D. The responsible supervisor promptly
Quick reporting enables action.

Report an error in this question

Related chapters

Continue learning

CSSD interview questions Mock tests MCQ practice CSSD NABH checklist

Frequently asked questions

How many Water Testing MCQs are available?

This page has 20 free MCQs on Water Testing with answers and explanations. More are added over time.

Is Water Testing practice free?

Yes. You can practice without login or payment.

Are these official CSSD exam questions?

No. They are original practice questions written for learning.