Conductivity – CSSD MCQ Questions and Study Notes
Conductivity is a quick measure of dissolved ions and shows how pure water is. Practice free CSSD MCQ questions on this topic below.
Take the Conductivity practice test All 45 chapters
Learning objectives
- Understand the key points of this topic
- Apply them in daily reprocessing practice
Study notes
Conductivity shows how well water carries electric current because of dissolved ions, in microsiemens per cm (µS/cm). Pure water has low conductivity. A rising reading in RO water signals loss of purification. It does not detect microbes.
Important points
- Low conductivity = purer
- Unit is µS/cm
- Does not show microbes
Key terms
Conductivity µS/cm Ions
Practice MCQs on Conductivity
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Conductivity measures:
- How acidic or alkaline the water is
- How warm the water is at the outlet
- How well water carries current due to dissolved ions
- How many bacteria are in the water
Show answer
More ions give higher conductivity.
2. Conductivity is measured in:
- psi
- µS/cm
- kg
- mm
Show answer
Microsiemens per centimeter.
3. Pure water has:
- Same as tap
- No reading
- Low conductivity
- High conductivity
Show answer
Few ions.
4. A rising conductivity reading in RO water suggests:
- A softer filter
- Colder water
- Better water
- Loss of purification performance
Show answer
Check the membrane.
5. Conductivity is a quick check of:
- pH only
- Bacteria count
- Endotoxin only
- Dissolved ion content
Show answer
It is a purity indicator.
6. Conductivity cannot show:
- Microbial contamination
- Dissolved ions
- Ionic content
- Purity trends
Show answer
Use culture tests for microbes.
7. 1 mS/cm equals:
- 100 µS/cm
- 10 µS/cm
- 1000 µS/cm
- 1 µS/cm
Show answer
A unit conversion.
8. Conductivity readings change with:
- Temperature, so compensation is used
- Nothing
- The color of the probe
- Time of day only
Show answer
Meters correct for it.
9. Conductivity probes should be:
- Never calibrated
- Left dirty
- Stored dry and dirty
- Kept clean and calibrated
Show answer
Care keeps readings accurate.
10. In-line conductivity monitors give:
- Taste data
- Real-time readings and alarms
- No data
- Weekly reports only
Show answer
Continuous monitoring.
Questions 11 to 20
11. Alarm set points are set:
- To the highest possible
- Randomly
- According to the quality limits
- Never
Show answer
Alarms must match limits.
12. When a conductivity alarm triggers you should:
- Stop critical use and investigate
- Ignore it
- Add detergent
- Mute it
Show answer
Protect devices and patients.
13. Conductivity does not reliably detect:
- Ionic purity
- Dissolved salts
- Non-ionic contaminants such as organics
- Mineral ions
Show answer
Use other tests too.
14. Conductivity and TDS are related because:
- TDS is often estimated from conductivity
- They are unrelated
- TDS measures bacteria
- Conductivity measures color
Show answer
Meters use a conversion factor.
15. A conductivity meter is calibrated with:
- Alcohol
- Tap water
- A known conductivity standard solution
- Soap
Show answer
Use a traceable standard.
16. Tap water conductivity is usually:
- Identical
- Much higher than RO water
- Lower than RO
- Zero
Show answer
More dissolved ions.
17. A drifting reading may mean:
- Probe fouling or a real water change
- A new label
- A new tray
- Perfect water
Show answer
Check the probe and the water.
18. A conductivity record should include:
- Only the date
- Only the value
- Date, value, location and initials
- Nothing
Show answer
Complete records.
19. Readings at the point of use show:
- Only the source
- Only the wrap
- Quality after piping and storage
- Nothing
Show answer
Contamination can occur in the system.
20. Conductivity readings are most useful for:
- Detecting endotoxin
- Counting bacteria
- Quick purity checks and trend monitoring
- Measuring pH
Show answer
A screening tool for dissolved ions.
Related chapters
- Previous: Silica
- Next: Microbiological Quality
- Chapter 37: Chloride
- Chapter 38: Silica
- Chapter 40: Microbiological Quality
- Chapter 41: Water Used in Washers
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Conductivity MCQs are available?
This page has 20 free MCQs on Conductivity with answers and explanations. More are added over time.
Is Conductivity practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.