Hydrogen Peroxide Plasma / VH2O2 – CSSD MCQ Questions and Study Notes
Hydrogen peroxide gas plasma and vaporized hydrogen peroxide (VH2O2) sterilize heat-sensitive devices at low temperature. Practice free CSSD MCQ questions on this topic below.
Take the Hydrogen Peroxide Plasma / VH2O2 practice test All 45 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them in safe practice
Study notes
Hydrogen peroxide vapor is injected into a vacuum chamber; in plasma systems, energy creates reactive species that destroy microorganisms. The cycle leaves no toxic residue, only water and oxygen.
Loads must be clean and completely dry. Cellulose materials (paper, linen, cotton) absorb peroxide and cause cycle cancellation. Lumen length and diameter claims must match the sterilizer's validated list.
Important points
- Dry loads only
- No cellulose
- Check lumen claims in IFU
- Use approved packaging
Key terms
Plasma VH2O2 Cycle abort Lumen claim
Practice MCQs on Hydrogen Peroxide Plasma / VH2O2
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Hydrogen peroxide cycles leave residues of:
- Acid
- Toxic gas
- Water and oxygen
- Oil
Show answer
Breakdown products are harmless.
2. A wet load in a peroxide sterilizer:
- Is required
- Has no effect
- Sterilizes better
- May cancel the cycle
Show answer
Moisture disrupts vacuum and vapor.
3. Which material should be avoided?
- Tyvek
- Polypropylene wrap
- Cellulose/paper
- Stainless steel
Show answer
Cellulose absorbs peroxide.
4. VH2O2 sterilization is done at:
- Low temperature
- Boiling
- Freezing
- Above 200 °C
Show answer
Low-temperature method.
5. Lumen claims come from the:
- Colleague
- Guess
- Label color
- Sterilizer and device IFU
Show answer
Validated claims.
6. Peroxide plasma is suited for:
- Liquids
- Heat-sensitive instruments
- Powders
- Linen
Show answer
Cannot process liquids or powders.
7. Instruments must be ___ before loading.
- Wet
- Clean and dry
- Oiled
- Soaked
Show answer
Cleanliness and dryness.
8. A cycle cancellation should be:
- Ignored
- Used anyway
- Recorded as sterile
- Investigated and reprocessed after correction
Show answer
Items are not sterile.
9. Packaging for peroxide systems must be:
- Cotton muslin
- Compatible/approved
- Any
- Newspaper
Show answer
Use approved packaging.
10. Peroxide sterilization needs prior:
- Thorough cleaning
- Nothing
- Painting
- Freezing
Show answer
Soil blocks sterilant.
Questions 11 to 20
11. How does gas plasma kill microorganisms?
- By freezing them
- Reactive peroxide species damage microbes
- By boiling them
- By drying them
Show answer
A low-temperature mechanism.
12. Which items cannot be processed in most hydrogen peroxide sterilizers?
- Metal instruments
- Cables
- Plastic scopes
- Liquids and powders
Show answer
They absorb or react with peroxide.
13. Load size in a peroxide sterilizer is limited by:
- Label color
- Chamber and weight limits in the IFU
- Staff mood
- Wrap length
Show answer
Overloading harms the cycle.
14. A compatible wrap or pouch is:
- A non-cellulose synthetic product approved for the process
- Any wrap that is thick enough to protect
- A linen towel folded twice around the tray
- A cotton or paper wrap used for steam loads
Show answer
Cellulose absorbs peroxide.
15. A cycle abort alarm requires:
- Finding the cause, repacking and reprocessing
- Releasing the load because it looks clean
- Restarting the same load without any check
- Wrapping the load and storing it as sterile
Show answer
Items are not sterile.
16. Which chemical indicator is used?
- A steam tape designed for autoclaves
- Any indicator tape that is available
- No indicator, since plasma is safe
- One designed for hydrogen peroxide processes
Show answer
Indicators are process-specific.
17. Lumen claims differ between sterilizers because:
- They never change
- Staff choose them
- Each model and cycle is validated separately
- Labels differ
Show answer
Check the exact sterilizer.
18. The usual biological indicator for peroxide systems is:
- Geobacillus stearothermophilus spores
- E. coli
- Virus
- Yeast
Show answer
Per the manufacturer.
19. VH2O2 stands for:
- Variable heat output
- Very high oxygen
- Vacuum hot oven
- Vaporized hydrogen peroxide
Show answer
A low-temperature method.
20. Peroxide cycles are shorter than ETO partly because:
- No aeration step is needed
- They are less safe
- They use no chamber
- They use no packaging
Show answer
Peroxide breaks down into water and oxygen.
Related chapters
- Previous: Low Temperature Sterilization
- Next: ETO Sterilization
- Chapter 6: Steam Sterilization
- Chapter 7: Low Temperature Sterilization
- Chapter 9: ETO Sterilization
- Chapter 10: Chemical Indicators
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Hydrogen Peroxide Plasma / VH2O2 MCQs are available?
This page has 20 free MCQs on Hydrogen Peroxide Plasma / VH2O2 with answers and explanations. More are added over time.
Is Hydrogen Peroxide Plasma / VH2O2 practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.